3D Printed Respirator Mask
Created by fluviolobo
Published:
4/26/20
UPStudio Slicer Settings
This is a 3D print of 3DPX-013948
Category
Devices and Hardware
Description
Printed the \Large\ model on a Cetus 3D MK2 at 0.25 layer height on fine mode and 13% infillThe print time was about 1.8 hours and required 35g of PLAUsed Proto Pastas HTPLA for a smooth interface to the skinThe print did not require any supportThe main goal of this build was to demonstrate compatibility with a small-build, open-source 3D printer
KEYWORD(S)
Cetus, HTPLA
PRINTER TECHNOLOGY
Material Extrusion - Single Extruder
MATERIAL
Polylactic Acid (PLA)
PRINTER MAKE/MODEL
Cetus 3D MK2
BUILD RESOLUTION (LAYER HEIGHT)
0.25
REFERENCE MODEL
