This is a fix of the original 3D Verkstan Face Shield https://www.youmagine.com/designs/protective-visor-by-3dverkstan/

 

To be used with a normal American 3 hole punch with a half inch spacer and a 8.5x11" sheet of plastic. Print out the 1/2" spacer here:
https://github.com/Cederb/Faceshield.nu/blob/master/North%20America%206-hole/3D%20Printing%20Files%20(STL)/Letter-spacer-6hole.stl

 

Place the spacer on the fixed end of the 3 hole punch. Punch your sheet, flip it over, and punch again. That way you have 6 holes on one side.

 

If you are in north america but you have an A4 sheet of plastic, you can use the files with the name "A4" in them. Same use of the 1/2 spacer.

 

You can view the main page here. This is where I post updates and people post comments and issues

 

https://www.youmagine.com/designs/verkstan-face-shield-north-american-6-hole-fixed