I created a remix of 6markfuller and UD-HensNest's great designs. UD-HensNest's original design incorporated a snap ring system that was improperly scaled at the time. I recreated the ring to incorporate a couple upgrades for different scenarios. I increased the size of the nib on both rings and then created two more with an overall longer lip along the z-axis. I also created a "Ring Only" version which I recommend for general use. I optimized the geometry of the ring to print best using a .4mm nozzle at .32mm layer height.

 

Purpose:

This setup makes it easier to breathe as it provides more surface area by creating a tent over your face. I'll leave the medical benefits to having a "tented" face covering up to the medical professionals but it would be worth checking both 6markfuller and UD-HensNests submissions.

 

Installation:

Print one S/M/L sized mask, ring, and tent per person. Attach UD-HensNest's "squigglyspider" to one of 6markfuller's masks by placing the nibs of the spider through the hole on the anchor points. Then place a filter medium over the ring and through the hole on the squigglyspider. Use whatever rubber-band/string material you have to fasten it on the anchors. Advised to form a system that goes over the back of your head rather than fastening it to your ears as it's uncomfortable. I use three rubber bands tied to each other with the band on the ends looping over the anchor hooks.

 

Credits:

6markfuller
UD-HensNest
Everyone not sitting idle while 2% of the world's human population faces death. Your efforts are making a difference.

 

https://3dprint.nih.gov/discover/3DPX-013512
https://3dprint.nih.gov/discover/3dpx-013674

 

ML

 

This device is a general purpose face mask intended for use in the community and is not suitable for use by a healthcare professional or in a healthcare facility or environment, as described in FDA Guidance Enforcement Policy for Face Masks and Respirators During the Coronavirus Disease (COVID-19) Public Health Emergency, Section V B. This device has not been tested to assess the out-gassing limits of the material or their corresponding health effects.