MECHANIC VENTILATOR - MINI - WAR ZONE

Those are last resort solutions! Use your own judgment!

An upgrade version of MECHANIC VENTILATOR - MINI , thicker walls, with a stronger motor - Nema 23, and with a motor cover - what is also the connection for an upgrade - battery and electronics box!

https://www.thingiverse.com/thing:4245897

As the previous model, a textile loop, controlled by an arduino, compress a manual emergency ventilator, and act as a mechanical emergency ventilator.

In order to prevent damage to the Emergency Bag - a protective SHIELD is used. Pass the textile strap through the shield.

Length of one coil is little over 69mm. The strap length use for MINI model was about 600mm.

System does not have a limit-switch.

All parts can be 3d printed.

All parts are design to print without support.

All stl files are in right position to be printed.

It use a Nema 23 Stepper Motor.

This machine was not tested and was not medical approved. Use it as a last resort!

Be Safe! Stay Safe!