Disclaimer: This project was created in 2020, a year of chaos, due to the pandemic. I'm sorry for any confusions or misunderstandings, regarding this project.

My take on a face-shield results in "STVS FaceShield". It's based on the model by 3DVERKSTAN (for EU hole punchers), where i extended the front, to get more breathing room between the face and the visor. I also replaced the bottom part with the PRUSA model, edited to have the same size. I've published two versions. One has the same height all the way, the other one contains a higher face-touching area, as high as PRUSA's model.

I designed it with my current experience in 3d-modeling, printing and manufacturing setup in mind. With my small printing bed, some edits were needed.

For legal reasons, this project is NEITHER a medical product NOR personal protective gear, on a legal standpoint, except otherwise.

This model is based and inspired on work from:

PRUSA Research : https://www.prusa3d.com/covid19

3DVERKSTAN: https://3dverkstan.se/protective-visor/