***CURRNENTLY AWAITING FOR APPROVAL OF ANOTHER PAGE FROM NIH** 

HOWEVER, CURRENT WORKING PIECE CAN BE DOWNLOADED BY DOWNLOADING THE FILES FROM THE DOWLOAD SECTION

CHECK OUT ADDITIONAL PAGE FOR PRINTED PHOTOS

ALSO ACCOMPANIED BY 2 DIFFERENT MOUNTS: 4 SCREW MOUNT AND CLAMP MOUNT

The purpose of this mount is to create a universal phone holder for various phones that can use the gyroscope within the phone as a level. The main piece consists of 4 pieces which are the Universal Phone Holder, Short Arm Atachment, Short Arm, and Long Arm. This will be used in conjunction with the universal mount. The idea of the universal mount is that individuals can take the stl or FreeCad file and edit it to apply it to any application they see fit.

There really is not a commercially similar item to this, but there are general phone holders that cost around $14. With the rubber bands, screws, and plastic, this phone holder level will cost you less than $5. Saving $9 and having a much larger range of applications.

Materials Needed: Two 3mm x 10 or 12 mm socket head cap screws, 2 rubber bands, and Two 5mm x 30 or 35mm socket head cap screws.

Created in collaboration with Mitchell DeNooyer who created two applicable mounts that are attached as FreeCad Files and stl's: 4 Screw Mount and the Crank Mount

Crank Mount need to download files: Crank_Final, Screw_Clamp_Attachment, and Screw_Mount_Final