Extrusion head with an integrated screw and UV-diodes attachments
Created by
kretzschmarni
Created:
10/25/17
Submitted:
3/6/23
Published:
3/6/23
extruder_head_final_201017_NIH3D.
Select an image below to view
Category
Description
This component can be used with open hardware extrusion-systems and is printed as one compontent (non-assembly) using Stereolithography. Up to 4 small UV-diodes can be attached from the side to allow instant curing of UV-sensitive printing material and the extrusion rate can be controlled accurately. Inner clearance varies between the STLs, changes can be made in open scad.