Guide Frame System to Adapt a 96-Well Plate Assay to Solid Media
Created by MALewis
Published:
6/24/25
Grid Template Frame shown placed on the back of 150 x 15 mm petri dish
This is a 3D print of 3DPX-022732
Category
Devices and Hardware
Description
The Taz Pro is using a 0.5-mm nozzle with 1.75-mm PLA filament.
The guide frame system has 5 total parts. (I suggest printing all parts at 100% fill)
- Bottom frame 46g; 3 hours, 11 minutes
- Grid Template Frame 13g; 47 minutes
- Horizontal Template 11g; 45 minutes
- Top Replicator Guide** 69g; 3 hours, 28 minutes
- Vertical Template 11g; 47 minutes
**use support material, 45-degree overhang angle, 10% density, 5-mm join distance
I suggest not using a brim or any bed adhesion
KEYWORD(S)
3D Printing, Alignment tool, Assay, Solid agar, Visual inspection
PRINTER TECHNOLOGY
Material Extrusion - Single Extruder
MATERIAL
Polylactic Acid (PLA)
PRINTER MAKE/MODEL
Lulzbot Taz Pro
SUPPORT MATERIAL
Other
BUILD RESOLUTION (LAYER HEIGHT)
0.25 mm
BUILD TIME
00:08:58
NUMBER OF PRINTS PER BUILD
1
SCALE AT GIVEN PRINT UNITS
1x
REFERENCE MODEL
