IC3D Budmen Face Shield 4x on a Taz Workhorse
Created by ic3dprinters
Published:
3/30/20
No images available
This is a 3D print of 3DPX-013309
Category
Devices and Hardware
Description
4 sets nest well on an 11x11\ (280x280mm) build plate (such as Taz 6 / Workhorse) to maximize off-hours printing.Primary Parameters:Nozzle diameter = 0.5mm (anything close is fine)Layer Height = 0.25mmInfill = 45%Perimeters = 3Bottoms = 5Tops = 5Extruder Temp = 270C (or your optimal for PETG)Bed = 85C (or your optimal for PETG)
Build Files
KEYWORD(S)
3D Printing, face shield, PPE
PRINTER TECHNOLOGY
Material Extrusion - Single Extruder
PRINTER MAKE/MODEL
Lulzbot Taz Workhorse
REFERENCE MODEL
