Face Shield with Optional part for closed top
Created by Admehnistrator
Published:
4/2/20
This is a 3D print of 3DPX-013445
Category
Devices and Hardware
Description
Post-PrintingBreak off the support tabsAttach sheet to the frameUse a 3-hole punch and attach the transparency to the frame. Start with the center hole first, then do each side. Be sure to align it under the support tab as shown above.Optional Shield installInsert the side arms into the both shield holes firstUse your fingers to pull and push the center point.
KEYWORD(S)
PRINTER TECHNOLOGY
Material Extrusion - Single Extruder
MATERIAL
Polylactic Acid (PLA)
PRINTER MAKE/MODEL
Ultimaker S5
BUILD RESOLUTION (LAYER HEIGHT)
.2
REFERENCE MODEL
