DtM-v3.1 Prints on Ultimaker S5
Created by horgan
Published:
4/20/20
No images available
This is a 3D print of 3DPX-013359
Category
Devices and Hardware
Description
Ultimaker S5, AA 0.4, Draft 70mm/sec, 30% Infill, 7hrs 31min for three parts (2.5 hrs / band).To fit three parts on print bed, disable build-plate adhsion (no brim). This will give you maximum area. All hand bands were rotated 15 degrees, and then positioned to avoid interfering with one another.
KEYWORD(S)
PRINTER TECHNOLOGY
Material Extrusion - Single Extruder
MATERIAL
Polylactic Acid (PLA)
PRINTER MAKE/MODEL
Ultimaker S5
BUILD RESOLUTION (LAYER HEIGHT)
0.4
REFERENCE MODEL
